|
1.
|
29
& 35 STN. Press is specially designed to compress
DS, Capsule & Oval shaped tablets of length 23 &
19 mm respectively. Round tablets of diameter 23 mm
(25.4 mm on demand) can be compressed on 29 STN Press.
|
|
2.
|
Force
feeders are provided to regulate uniform flow of large
volume of granules at high speed.
|
|
3.
|
Standard
feed frames are also supplied along with the machine.
This facilitates in compressing certain products where
force flow feeders are not suitable. It can also be used
as an alternative arrangement in case of breakdown of
force flow feeders.
|
|
4.
|
For
fluffy products where flashing takes place it can be set
on the lower position of the die.
|
|
5.
|
For
sticky products, this can be set nearer to the top face
of the die to avoid heavy ejection load and friction. It
also helps in avoiding flying of upper punches due to
vacuum.
|
|
6.
|
Die
life can be increased more then doubled by changing the
position of compression.
|
|
7.
|
Upper
cam Tracks-Lowering and lifting are so designed to lift
the upper punches evenly from both sides. This helps in
smooth running of the machine and prevents jumping of
upper punches at high speed.
|
|
8.
|
Upper
punches are covered with acrylic dust guards.
|
|
9.
|
Turret
with key slots essential for shaped tooling provided on
29, 35 & 37 STN press. (Optional on 45 & 47 Stn.
Press.)
|
|
10.
|
All
major controls outside the compression area to meet GMP
norms and easy to reach.
|
|
11.
|
Electronic
total output counter is provided on the control panel.
|
|
12.
|
Anti
vibration mounting provided, hence no foundation is
required.
|
|
13.
|
Top
acrylic guards are interlocked to prevent the machine
being operated when the guards are open for safety
purpose.
|
